Key takeaways
-
Indoor air in UK homes can contain 2 to 5 times more pollutants than outdoor air, according to the UK Health Security Agency
-
People in the UK spend around 90% of their time indoors, which makes indoor air quality(IAQ) a significant daily exposure consideration
-
The main sources of indoor air pollution in British homes are cooking, heating appliances, cleaning products, furniture off-gassing, damp and outdoor air entering the building
-
Improving IAQ follows a clear sequence: reduce pollutant sources first, then ventilate, then filter
-
An air purifier is most effective as the third step - used alongside source control and ventilation, not instead of them
Indoor air quality (IAQ) describes the condition of the air inside a building, shaped by the concentration of pollutants present and how effectively that air is exchanged with fresh air from outside. According to the UK Health Security Agency, indoor air in UK homes can be 2 to 5 times more polluted than the air outside. Given that most people in this country spend around 90% of their time indoors, the air at home matters more than most people realise. This guide explains what indoor air quality is, what affects it and the practical steps you can take to improve it.
What is indoor air quality?
Indoor air quality measures how clean or polluted the air inside a building is at any given time. It is shaped by three main factors: the pollutants produced inside the building, the outdoor air that enters through windows, gaps and ventilation systems, and how effectively the building exchanges stale indoor air for fresh air from outside.
Regulators, building professionals and public health bodies use the term IAQ to assess conditions in homes, schools, offices and other enclosed spaces. For homeowners and renters, it is a practical way to understand what is in the air they breathe every day.
The UK currently has less developed regulation on indoor air quality than on outdoor air pollution. The Air Quality Expert Group (AQEG), which advises the Department for Environment, Food and Rural Affairs (Defra), published a report in 2022 noting that UK policy on IAQ is fragmented and needs a more coordinated approach. That gap places more responsibility on individuals to manage the air in their own homes.
How is indoor air quality measured?
IAQ is assessed by measuring the concentration of specific pollutants. The key ones for residential settings are PM2.5 (fine particles smaller than 2.5 micrometres in diameter), carbon dioxide (CO2), volatile organic compounds (VOCs), nitrogen dioxide (NO2) and humidity levels.
PM2.5 concentration is expressed in micrograms per cubic metre of air (µg/m³). The World Health Organization's 2021 air quality guidelines set an annual mean target of 5 µg/m³ for PM2.5. The UK's 2024 outdoor average sat at 7.2 to 7.5 µg/m³ - already above that guideline before accounting for indoor sources. CO2 is measured in parts per million (ppm); levels above 1,000 ppm in an occupied room indicate inadequate fresh air exchange.
Consumer IAQ monitors are widely available and measure PM2.5, CO2, VOCs and humidity in real time. They do not replace professional testing, but give a useful picture of conditions across different rooms at different times of day.

Indoor vs outdoor air quality: how do they compare?
Most people assume that stepping inside means stepping away from pollution. The data suggests otherwise. The UK Health Security Agency reports that indoor air can contain 2 to 5 times the concentration of pollutants found outdoors, and in poorly ventilated spaces that figure can be higher still.
Modern, well-insulated UK homes can trap pollutants more effectively than older, draughtier properties - simply because they are better sealed. That energy efficiency benefit comes with a trade-off: less natural air exchange means pollutants produced inside build up faster.
Outdoor pollution also does not stay outside. Traffic-related PM2.5 and NO2, pollen and other particles enter through open windows, trickle vents and gaps in the building fabric. Good indoor air quality is not simply a matter of staying indoors with the windows shut. It requires understanding where pollution comes from and managing it actively.
What causes poor indoor air quality?
Most indoor air pollution comes from ordinary household activities and the materials inside the home. There is no single cause. The AQEG 2022 report and research from the National Centre for Atmospheric Science (NCAS) identify several distinct source categories, each producing different pollutants.
Cooking and heating appliances
Cooking is one of the highest-concentration pollution events in a typical UK home. Gas hobs produce nitrogen dioxide and carbon monoxide during normal use. Frying and grilling release fine particles and VOCs. Research from the NCAS identifies gas cookers as one of the primary domestic sources of both NO2 and CO in British homes.
Wood-burning stoves produce significant PM2.5 emissions. The UK's 2021 Clean Air Strategy introduced restrictions on the sale of wet wood and coal for domestic burning, reflecting concern about the particle concentrations these appliances create. Using an extractor fan vented to the outside while cooking is one of the most effective single changes a household can make.
Annual boiler servicing by a Gas Safe registered engineer also matters. A poorly maintained gas boiler increases carbon monoxide risk in the home.
Cleaning products, candles and fragrances
Many household cleaning sprays, air fresheners, scented candles and synthetic fragrances release VOCs during use. New furniture, flooring and freshly painted walls can off-gas formaldehyde and other compounds for weeks or months after installation. This is a particular consideration for anyone who has recently moved, renovated or redecorated.
Low-VOC products are available across most DIY and home goods retailers in the UK. They do not eliminate emissions entirely, but they reduce the concentration released indoors. For more on how air purifiers handle VOC-related odours and particles, do air purifiers remove odours covers what filtration can and cannot address.

Damp, mould and condensation
Damp is common in older British housing stock. When moisture condenses on cold surfaces - window frames, external walls, bathroom ceilings - it creates conditions in which mould grows. Mould releases spores into the air, adding to the particulate load in the room.
Condensation is the primary driver. Cold surfaces plus warm, humid air produced by cooking, showering and breathing is a combination found in millions of UK homes every winter. Improving thermal insulation, running bathroom and kitchen extractor fans consistently, and keeping indoor humidity between 40% and 60% all reduce the conditions that allow mould to develop. For more on the role filtration plays in managing airborne mould spores, can air purifiers fight mould explains what a HEPA filter can capture and where its limits are.
Outdoor air entering the home
Outdoor pollution does not stop at the front door. Traffic-related NO2 and PM2.5 enter through open windows and ventilation systems, particularly in urban areas and homes close to busy roads. During spring and early summer, airborne pollen from trees, grasses and weeds also enters this way.
The INGENIOUS project, a research initiative studying indoor air quality across UK households led by the University of York, has confirmed that outdoor air is a meaningful contributor to indoor pollutant concentrations in British homes. This does not mean windows should stay shut. It means ventilation choices benefit from some awareness of what is happening outside.
What are the signs of poor indoor air quality?
Observable signals alone cannot give a definitive answer, but several signs in the home suggest that pollutant concentrations may be higher than average.
Observable signs in the home
Persistent condensation on windows overnight - particularly in bedrooms and kitchens - points to insufficient ventilation or high indoor humidity. A musty or stale smell that does not clear when windows are opened suggests a moisture or mould issue. Visible mould on walls, ceilings or around window frames is a clear indicator that spores are present in the room.
Dust accumulating quickly after cleaning can suggest that airborne particles are being generated at a higher rate - from cooking, soft furnishings or outdoor ingress.
Conditions that suggest higher pollutant exposure
Certain household patterns increase the likelihood of elevated concentrations. Cooking frequently on a gas hob without extraction, using a wood-burning stove regularly, living in a recently furnished or repainted property, and living close to a busy road are all factors that raise indoor pollutant levels.
None of these is cause for alarm in isolation. They are useful prompts to look more closely at ventilation and filtration.
How to improve indoor air quality at home
Improving indoor air quality follows a logical sequence. The most effective approach is to reduce pollutant sources first, then ensure adequate ventilation, then use filtration to capture what remains. Each step targets a different type of pollutant. Skipping any one of them weakens the result.
This three-step hierarchy - source control, ventilation, filtration - is the framework recommended by the US Environmental Protection Agency and applied consistently by air quality researchers across the UK and internationally.
Step 1 - reduce pollution at the source
Source control is the most cost-effective action. Opening a window when using a cleaning spray, putting a lid on a saucepan, or switching from an aerosol to a pump dispenser all cost nothing.
More involved changes include switching to an electric or induction hob, choosing low-VOC paints and adhesives for home improvements, addressing damp before it becomes mould by fitting a bathroom extractor fan that vents to the outside, and having gas appliances serviced annually by a Gas Safe registered engineer.
New furniture and flooring are also worth considering. Off-gassing from synthetic materials peaks in the first few weeks after installation. Airing a newly furnished room thoroughly during this period reduces VOC levels measurably.
Step 2 - ventilate consistently
Ventilation is the second line of action, and among the most underused. Opening windows for as little as ten minutes can reduce CO2 concentration in an occupied bedroom significantly - particularly first thing in the morning, when overnight levels have accumulated.
Cross-ventilation, using windows on opposite sides of a room or home, clears stale air more effectively than opening a single window. Extractor fans in kitchens and bathrooms should run during cooking or showering, and for at least fifteen minutes after.
Check the trickle vents on window frames. These small slots allow background ventilation without fully opening a window. In many UK rental properties they are found taped shut or painted over; clearing them takes only a few minutes.
One caveat applies to homes near busy roads: opening windows during peak traffic hours can draw NO2 and PM2.5 indoors. Early morning or late evening is generally a cleaner window for urban ventilation.
Step 3 - filter the air
When source control and ventilation are in place, an air purifier provides a further layer of particle removal - particularly useful for fine particles (PM2.5) that remain airborne long after their source has been addressed.
Air purifiers work by drawing room air through a series of filters. A HEPA filter removes fine dust, pollen, pet dander and mould spores by capturing them mechanically as air passes through. An activated carbon stage then addresses odours and VOCs. For more on how the process works, how air purifiers work covers the mechanics in plain terms.
Coway's HyperCaptive Filtration System removes 99.999% of airborne particles down to 0.01 µm. This is the performance of the complete Coway filtration system, not of the HEPA filter media alone. HEPA describes the filter media; HyperCaptive Filtration describes the full system.
Room sizing matters as much as filter type. CADR (Clean Air Delivery Rate) tells you how quickly a unit processes the air in a given room - a higher figure means faster air turnover. For a plain-English explanation of how CADR works and what it means for your room, our CADR guide is a useful starting point.
For a typical UK bedroom, the Airmega 100 has a CADR of 244 m³/h and is rated for rooms up to 25 m². For larger bedrooms and open living areas, the Airmega 150 covers rooms up to 73 m² at 20 dB in Sleep Mode, and holds Quiet Mark certification. The full Coway air purifier range covers spaces from compact flats to larger open-plan rooms.

How to test indoor air quality at home
Consumer IAQ monitors are the simplest way to get a picture of conditions at home. Most devices measure PM2.5, CO2, VOC concentration and humidity; some add temperature and NO2. They are widely available from UK home electronics retailers.
For radon - a naturally occurring radioactive gas - dedicated test kits are worth considering in parts of the UK where bedrock geology increases the risk, including Cornwall, Devon, Northamptonshire and parts of Scotland. The UK Health Security Agency publishes a radon risk map searchable by postcode.
Carbon monoxide detectors are a legal requirement in rooms with fixed combustion appliances in rented properties in England and Wales, under regulations updated in October 2022. Whether or not a legal requirement applies, a CO detector near any gas appliance is sound practice.
Where persistent damp, suspected asbestos in older properties or complex ventilation problems are involved, a professional IAQ assessment is the appropriate step.
Seasonal indoor air quality in UK homes
Indoor air quality shifts with the seasons. Those changes are particularly pronounced in the British climate, and anticipating them makes them easier to manage.
Spring and summer - pollen season
The UK pollen season runs from late March through to September, with tree pollen peaking in spring, grass pollen from mid-May to July, and weed pollen extending into early autumn. Opening windows for ventilation during this period increases the amount of airborne pollen inside the home.
A HEPA filter traps airborne pollen particles, which typically range from 10 to 100 micrometres in size. Running an air purifier in the bedroom during high-pollen periods reduces pollen concentration in the air overnight. Coway's range of air purifiers for pollen covers different room types and sizes.
Autumn and winter - sealed homes and damp
As temperatures drop, UK households close their homes and reduce ventilation. CO2 levels rise in occupied rooms as fresh air exchange decreases. Heating drives off-gassing from furniture and textiles. The combination of reduced airflow and higher indoor humidity from cooking and bathing creates the conditions for condensation and mould.
Maintaining some daily ventilation - even briefly - is the single most important habit during winter months. For more on managing air quality as colder weather sets in, autumn mould and indoor air quality and winter indoor air pollution tips cover the UK context in practical detail.
FAQ
What is indoor air quality?
Indoor air quality (IAQ) describes the condition of the air inside a building, determined by the type and concentration of pollutants present and how effectively indoor air is exchanged with fresh outdoor air. It is assessed through measurements of particles (PM2.5), gases (CO2, NO2, VOCs) and humidity.
Is indoor air quality worse than outdoor air quality in the UK?
It can be. The UK Health Security Agency states that indoor air can contain 2 to 5 times more pollutants than outdoor air. This is particularly true in well-insulated modern homes with low air exchange, and during winter when windows stay shut for extended periods. Outdoor pollution also enters the home, so the two are connected rather than separate.
What are the main causes of poor indoor air quality in UK homes?
The main sources are cooking (particularly on gas hobs), heating appliances, cleaning products and aerosol sprays, new furniture and flooring off-gassing VOCs, damp and mould, and outdoor pollutants such as traffic fumes and pollen entering through windows and ventilation.
How do I test indoor air quality at home?
Consumer IAQ monitors measure PM2.5, CO2, VOCs and humidity in real time and are widely available from UK home electronics retailers. Radon test kits are available for higher-risk areas. Carbon monoxide detectors are a legal requirement in rental properties with fixed combustion appliances in England and Wales.
Does opening windows improve indoor air quality?
Yes, in most cases. Ventilation is the second step in the source control - ventilation - filtration hierarchy. Opening windows for ten minutes, even in winter, measurably reduces CO2 and other accumulated pollutants. Homes near busy roads benefit from ventilating early in the morning or late in the evening, when traffic-related pollution outdoors is lower.
What does an air purifier do for indoor air quality?
An air purifier draws room air through filters that capture airborne particles. A HEPA filter removes fine dust, pollen and mould spores; an activated carbon filter addresses odours and VOCs. It is most effective as the third step in the process - after source control and ventilation - rather than as a replacement for them.
How often should I change my air purifier filter?
Filter replacement intervals vary by model and usage. Most Coway Airmega filters are rated for up to 12 months, though running a purifier in a cooking-heavy kitchen or a high-pollution urban room may require more frequent checks. For model-specific guidance, our filter replacement guide covers when and how to replace Airmega filters.
Does indoor air quality affect sleep?
CO2 rises overnight in sealed bedrooms as occupants breathe in an unventilated space. A 2016 study by Strøm-Tejsen et al. from the Technical University of Denmark, published in the journal Indoor Air, found measurable improvements in next-day alertness when bedroom CO2 was reduced through ventilation. The fix for overnight CO2 build-up is ventilation - opening a window before bed is the most direct approach. An air purifier running overnight addresses a different problem: it helps reduce airborne particles such as PM2.5, pollen and dust that accumulate in a closed bedroom while ventilation is limited.
Conclusion
Indoor air quality in UK homes is shaped by everyday activities, the materials inside the building and the outdoor air that enters. Source control reduces what goes into the air. Ventilation removes what has accumulated. Filtration captures what remains. Applied together, these three steps give most households a practical and proportionate way to manage the air inside their home. Browse the Airmega range on Coway UK to compare models by room coverage and filter type.
References
-
UK Health Security Agency - indoor time-spent and indoor/outdoor exposure ratio: https://www.gov.uk/government/organisations/uk-health-security-agency
-
Air Quality Expert Group (AQEG) / Defra - Indoor Air Quality Report, 2022: https://uk-air.defra.gov.uk/assets/documents/reports/cat09/2211011000_15062022_Indoor_Air_Quality_Report_Final.pdf
-
World Health Organization - WHO Global Air Quality Guidelines, 2021 (PM2.5 annual mean 5 µg/m³): https://www.who.int/news-room/fact-sheets/detail/ambient-(outdoor)-air-quality-and-health
-
National Centre for Atmospheric Science (NCAS) - Scientists explain why the UK can't ignore indoor pollution, 2024: https://ncas.ac.uk/scientists-explain-why-the-uk-cant-ignore-indoor-pollution/
-
INGENIOUS project, University of York - indoor air quality research across UK households: https://ingenious.york.ac.uk
-
Elite Renewables - Home Air Quality Statistics 2026 (UK PM2.5 average 7.2-7.5 µg/m³ for 2024): https://www.eliterenewables.co.uk/blog/home-air-quality-statistics-2026-uk-global-data/
-
UK Clean Air Strategy 2021 - domestic burning regulations: https://www.gov.uk/government/publications/clean-air-strategy-2019
-
UK Government - Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022: https://www.legislation.gov.uk/uksi/2022/707/contents/made
-
Strøm-Tejsen, P. et al. - "The effects of bedroom air quality on sleep and next-day performance," Indoor Air, 2016: https://onlinelibrary.wiley.com/doi/10.1111/ina.12254