Key Takeaways
-
Standard HEPA air purifiers use dry filter media and need no water to run - there is no water tank or reservoir, and the HEPA filter and electronics must stay dry.
-
Water introduced into a standard air purifier can degrade the HEPA filter media and reduce particle capture performance, shortening the filter's service life.
-
Some devices do use water: combination air purifier and humidifier units have a dedicated water tank, but it feeds only the humidification function - the filtration side stays dry.
-
Air washers are a separate category that pass air through water rather than dry filter media; they are not the same as HEPA filter air purifiers.
-
Essential oils, fragrances, and other liquids should not be added to a standard air purifier - a separate diffuser placed in the same room is the practical alternative.
No - standard HEPA air purifiers do not use water. They work entirely through dry filter media: a fan draws room air through the HEPA filter, particles are captured in the fibres, and filtered air returns to the room. No water tank or reservoir, and the HEPA filter runs dry. Some devices marketed as air purifiers do incorporate water - but they belong to different product categories. This guide explains which is which, what to do if your unit comes into contact with moisture, and how to maintain a HEPA air purifier correctly.
Do you put water in a standard air purifier?
No. A standard HEPA air purifier does not use water, require water, or have any compartment for it. The entire filtration process runs dry.
How a HEPA air purifier works without water
An internal fan draws room air through the unit. That air passes through a HEPA filter - a mat of very fine fibres that captures particles as air moves through it. Dust, pollen, pet dander, mould spores, and fine particulates (PM2.5 and smaller) become trapped in the media. Filtered air then returns to the room.
Models with an activated carbon layer work the same way. The carbon adsorbs gaseous pollutants and odours from the passing air stream - no water involved at any stage. The unit draws air in, filters it, and pushes it back out. Understanding how HEPA filtration works at the particle level is covered in the Coway micron rating guide.
Why water and HEPA filter media don't work together
HEPA filter fibres are engineered to capture dry particles from a dry airstream. Introducing water changes that.
Damp fibres can clump and lose their structural consistency, creating gaps that reduce how effectively the filter captures fine particles. A wet filter also loads with particles faster than a dry one, shortening its service life before replacement is needed. Beyond performance, sustained moisture inside a closed unit is not what the filter media is designed for, which is why manuals specify dry indoor use only.
Water near internal electrical components is a hazard. Standard air purifiers are designed for dry indoor use only, and product manuals across all categories reflect this consistently.

Which air purifiers do use water?
Two distinct product categories use water as part of their operation. Neither is the same as a standard HEPA air purifier.
Combination units: air purifier and humidifier in one
Some devices combine a HEPA filtration system with a built-in humidifier. These units have a dedicated water tank - but that tank feeds only the humidification side. The air purification side remains entirely dry.
The water tank holds water that is evaporated or dispersed to raise indoor humidity. The HEPA filter captures particles from the room air independently of this. The two functions run in parallel; the water never contacts the filter media.
Water tank maintenance on these units is separate from filter maintenance. The tank needs cleaning regularly to prevent mineral build-up and bacterial growth - most product manuals cover this schedule in detail. If you own a combination unit, the manual will specify whether and how to fill the water tank, and on what schedule to clean it.
Air washers: water as the filtration medium
Air washers are a separate product category. Instead of a dry HEPA filter, they draw room air through a series of rotating discs or plates that sit partially submerged in a water reservoir. Particles are captured as air passes through the water. The reservoir needs regular draining and refilling to remain effective.
The two approaches work differently. Air washers capture particles in water and need regular water changes; HEPA filter purifiers capture particles in dry filter media and need periodic filter replacement. If fine particle capture is your priority, compare the CADR and the filtration specification of any unit you are considering.
How to confirm which type of unit you have
Check the product manual. A standard HEPA air purifier will have no water tank, no filling instructions, and no section on cleaning a reservoir. A combination unit or air washer will include specific guidance on water management.
Coway Airmega models - the 100, 150, and Mighty - are all standard HEPA filter air purifiers with no water tank or reservoir.
What happens if water gets into a standard air purifier?
If water enters a standard unit, the HEPA filter is the primary concern. Damp filter fibres lose their consistency and the filter's ability to capture fine particles drops. Running the unit in a damp state also works against what the filter media is designed to do.
Steps to take if your unit is exposed to moisture
Switch the unit off and unplug it from the mains straight away. Keep it unplugged until fully dry. Remove the filter and inspect it - a damp or saturated HEPA filter should be replaced rather than dried and reused, as drying does not restore its original fibre structure or performance.
Wipe down the exterior casing with a dry cloth. Leave the unit in a well-ventilated area, unplugged, for at least 24 hours before reconnecting. If the unit shows any signs of electrical damage after drying - unusual sounds, a burning smell, or persistent error lights - do not use it.
The Coway HEPA filter replacement guide covers how to assess filter condition and when replacement is the right call.
Can you add anything else to an air purifier?
No. Standard HEPA air purifiers are designed for dry air only. No water, no oils, no fragrances, no additives of any kind should be introduced inside the unit or through its intake.
Essential oils and fragrances
Oil residue coats HEPA filter fibres and reduces their ability to capture particles. It can also degrade the activated carbon layer in models that include one. Some manufacturers void the product warranty if non-approved substances are introduced into or near the air intake - check your unit's documentation if in doubt.
The same applies to fragrance sprays directed at the intake. Even brief, repeated exposure to oily residue affects filter performance over time.
Scent and air purification: running a diffuser alongside
A separate ultrasonic or reed diffuser placed in the same room is the practical alternative. The diffuser disperses fragrance independently; the air purifier continues to filter room air as normal. Position them apart rather than directly adjacent - the Coway air purifier placement guide covers optimal positioning for different room layouts.
How to clean and maintain an air purifier correctly
None of the correct maintenance steps involve introducing water into the unit. The exterior, pre-filter, and main HEPA filter each need a different approach.

Cleaning the exterior
Unplug the unit before any cleaning. Wipe the outer casing with a lightly dampened cloth - no spray cleaners, no liquid directed at the air inlet or outlet. Dry the casing immediately afterwards.
Cleaning the pre-filter
The pre-filter sits in front of the main HEPA filter and catches larger particles - dust, hair, and debris - before they reach the finer filter media. On Coway Airmega models, it slides or lifts out cleanly. Depending on the model, the pre-filter can be vacuumed, brushed, or rinsed under water - check your model's manual, as not all are washable, and let it dry fully before refitting. The pre-filter is the only part that may be washed; never wash the HEPA or carbon filters.
Cleaning the pre-filter regularly - roughly every two to four weeks under normal use, or as your manual advises - extends the service life of the main HEPA filter. The task takes only a few minutes.
Replacing the HEPA filter on schedule
HEPA filters are replaced, not washed. Water destroys the fibre structure of HEPA media; a filter that has been washed should not be reused. When the filter reaches the end of its service life, replacement is the only correct step.
Coway Airmega HEPA filters are rated for 12 months under standard use, with the Airmega 50's 3-in-1 filter rated for 8 months. Filter indicator lights on all Airmega models signal when replacement is due, removing the need to track dates manually. Replacement filters for each model are listed in the Coway filters collection.
Choosing a HEPA air purifier for your home
If you are selecting a standard HEPA filter air purifier, there are a few practical criteria worth weighing up.
Matching the unit to the room
CADR (Clean Air Delivery Rate) determines how much air a unit can filter per hour. Matching CADR to room size gives you the number of air changes per hour the purifier can deliver. How many you want depends on what you are filtering: around three to four an hour suits everyday dust, four to five where allergens such as pollen or dust mite particles are the main concern, and around 4.8 where smoke is a factor. Coverage figures on a product page give the maximum room size the unit is rated for. For larger or multi-use spaces, a higher-capacity model covers more ground.
The air purifiers for small spaces collection lists models suited to compact rooms. For mid-size and open-plan spaces, the air purifiers for medium spaces collection covers a wider floor area.
The Coway Airmega range
Coway designs and manufactures its Airmega range in-house. All models are standard HEPA filter air purifiers - dry filter units with no water component of any kind.
The Airmega 100 is designed for compact rooms, running at 20 dB on its lowest setting with an adjustable mood light. The Airmega 150 suits mid-size and multi-use rooms, with auto mode and a colour air quality indicator. The Airmega Mighty covers larger rooms and shared spaces, with eco mode for reduced energy use when air quality is stable.

FAQ
Do you put water in an air purifier?
No - standard HEPA air purifiers use dry filter media and require no water. There is no water tank or reservoir, and the HEPA filter runs dry. Some combination units have a water tank for their humidification function, but the purification side of those devices remains entirely dry.
What happens if water gets into an air purifier?
Switch off and unplug the unit immediately. Remove and inspect the filter - a damp or saturated HEPA filter should be replaced, as drying does not restore its original performance. Leave the unit unplugged in a ventilated space for at least 24 hours before reconnecting.
Are there air purifiers that use water?
Yes, two categories: combination units, which pair a HEPA filter with a built-in humidifier and have a separate water tank for the moisture function only; and air washers, which draw air through water-submerged rotating discs. Neither is the same as a standard HEPA filter air purifier.
Can you clean an air purifier filter with water?
The pre-filter can be - on models where the manual allows it, vacuum, brush, or rinse it and let it dry before refitting. The HEPA and carbon filters are never washed: water destroys the filter media, so a washed filter should not be reused. When the HEPA filter is spent, replace it with the correct one for your model.
Can you put essential oils in an air purifier?
No. Oil residue coats HEPA filter fibres and reduces particle capture performance. It can also degrade the activated carbon layer in models that include one. Use a separate diffuser in the same room if you want to add fragrance alongside air purification.
Do air purifiers dry out the air?
No. Air purifiers filter particles from the room air but have no effect on its moisture content. Running one will not lower or raise indoor humidity. A separate humidifier is the relevant device for addressing dry air.
How often should you replace an air purifier filter?
HEPA filters in Coway Airmega models are rated for 12 months under standard use, and the Airmega 50's 3-in-1 filter for 8 months. Filter indicator lights signal when replacement is due. In rooms with heavy dust loads, pets, or high particle levels, filters may need replacing before that interval.
What is the difference between an air purifier and an air washer?
An air purifier draws room air through dry HEPA filter media. An air washer draws air through water-submerged rotating discs, trapping particles in the water. Air washers require regular water changes; HEPA air purifiers require periodic filter replacement. The two use different mechanisms and are not interchangeable.
Conclusion
Standard HEPA air purifiers use no water. They filter room air through dry filter media - no tank, no reservoir, no liquid. Combination units pair a HEPA filter with a built-in humidifier and include a water tank, but only for the moisture side. For standard units, correct maintenance means vacuuming the pre-filter regularly, replacing the HEPA filter on schedule, and keeping water away from the HEPA filter and electronics. The Coway Airmega range covers compact to larger rooms - all dry-filter units, no water required.